Tel：189-66298088
PIPE END CAPS – ROUND, CARBON,ALLOY, STAINLESS STEEL PIPE CAPS
Pipe End Cap Production Range
Outside Diameter: 1/2″ – 48″Wall Thickness: 2-40 mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS,SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low-temperature Steel, Carbon Steel, Cupronickel
Manufacturing Standards
ASME: ANSIB16.9, ANSI B16.28, MSS-SP-43DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2
ASTMA403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASMEB16.9 – Factory-Made Wrought Fittings Butt-welding
ASMEB16.25 – Butt-welding Ends ASME B16.28 – Wrought Steel Short RadiusElbows and Butt-welding Returns
MSSSP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure,Corrosion Resistant Applications
Pipe CapMaterial Grades
StainlessSteel Pipe Cap; ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347,904L
Carbon Steel Pipe Cap: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65& WPHY 70.Low-Temperature Carbon Steel Pipe Cap: ASTM A420 WPL3, A420 WPL6
AlloySteel Pipe Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22,WP 91
DuplexSteel Pipe Cap: ASTM A815, ASME SA 815 UNS NO S31803, S32205. Material No. 1.4462
NickelAlloy Pipe Cap: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3,
UNS 8825 INCONEL(825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL625), UNS 10276 ( HASTELLOY C 276 )